Cut Kitchen worktop to install a kitchen sinkIf you are planning to install kitchen sink, then make sure that you cut the kitchen worktops effectively and avoid any damages.
The kitchen remodeling project is incomplete without a stylish worktop. A good quality worktop is easy to maintain and install. The kitchen worktops play a crucial role in the everyday activities. One has to install stoves, sink and other units on its surface. Hence, the stone is cut to the respective size so that it can fit in the kitchen accessory.
However, you need to follow an effective strategy while cutting the kitchen worktops.
Kitchen worktop cutting technique
Firstly, measure the area of the kitchen sink. The standard size of the kitchen sink is 33 x 22 inches. Make a mark of 32 ¼ and 21 ¼ on the worktop with help of a marker. Don't forget to render a circular edge to the corners. This facilitates the setting of kitchen sink on the worktop.
You should use a skill saw to cut the kitchen worktops. Cut the tiles from bottom and hold the cut out with two nails. This ensures that the tiles do not chip the plastic when you are done with the cutting process. You can also use a jig saw to even out the edges in a round shape. Make sure that the task is done carefully. A minor mistake can ruin the complete installation process.
You should remove the cut out, once you have installed the worktop perfectly. You can buy a masking tape to lay the sink properly. It adds strength to the sink and prevents chips and damage. You can also find mask tapes that can't be seen.
If you find it difficult to handle skill saw, then you can use a jig saw. You can make the process easier by drilling the worktop near the markings. Remember, to cut the tile surface within the mark.
The process is quite tedious; hence it is beneficial to appoint a specialist for the job. This ensures that the kitchen worktops are cut effectively without any errors.
The author invites you to visit:
If you found this page useful please click the +1 button below to tell Google that its a great page!
Please share this page with others, and leave a comment, we value all feedback!
Was this page useful? Do you have something to add? Do you disagree?
If your comments meet our guidelines then we will publish them (you do not need to register!)
Ttradesman - click here to join our network to receive leads from customers in your area